Split Plummer block

SD SERIES SERIES SD3100 SD3000 SD500 SD600 HOUSING RANGE 3134 - 3180 3034 - 3076 534 - 564 634 - 656 SHAFT DIA 150 ~ 380 mm 150 ~ 360 mm 150 ~ 300 mm 150 ~260 mm APPLICATION Design to handle higher load rating and moderate speed. LUBRICATION Grease standard, circulating oil lubrication available. SEAL SELECTIONS Labyrinth(TS)with rubber O cord, Taconite seal(TAC) End cover(TSA) if bearing is mounted at the end of a shaft. REMARK Four bolt mounting with eye bolts on the top for easy handling.

SAF SERIES SERIES SAF 500 SAF 600 SAF 200 SAF 300 HOUSING RANGE 509 - 544 609 - 640 216 - 244 309 - 340 SHAFT DIA (inch measurement) 1 7/16 ~ 7 15/6 1 7/16 ~ 7 3/16 3 5/8 ~ 9 9/16 (d1) 3 ~ 8 5/16(d0) 2 1/8 ~ 8 3/4 (d1) 1 11/16 ~ 7 5/8 (d0) APPLICATION design to handle heavy loads and operate in a dusty environment. LUBRICATION grease or oil. SEAL SELECTIONS L.E.R, Taconite seal (TAC) End cover(E.P.R) if bearing is mounted at the end of a shaft. REMARK SAF series availabe for 4 bolt mounting. *SAF200 & SAF300 are suitable for stepped cyclindrical shafts.

SDAF SERIES SERIES SDAF 500 SDAF 200 HOUSING RANGE 520 - 544 220 - 244 SHAFT DIA (inch measurement) 3 7/16 ~ 7 15/16 4 1/2 ~ 9 9/16(d1) 3 3/16 ~ 8 5/16(d0) APPLICATION design to handle extreme heavy loads. LUBRICATION grease or oil SEAL SELECTIONS L.E.R, Taconite seal (TAC) End cover(E.P.R) if bearing is mounted at the end of a shaft. REMARK SAF series availabe for 4 bolt mounting. *SAF200 & SAF300 are suitable for stepped cyclindrical shafts.

SN SERIES SERIES SN 500 SN 600 SN 200 SN 300 SN 3000 SN 3100 HOUSING RANGE 506-532 607-632 207-232 307-332 3024-3038 3122-3132 SHAFT DIA 25 ~ 140mm 30 ~ 140mm 35 ~ 160mm 35 ~ 160mm 110 ~ 170mm 100 ~ 140mm APPLICATION For moderate load and speeds LUBRICATION grease or oil SEAL SELECTIONS Felt, ZF, Labryinth (TS) Or end covers (TSA or NA) if bearing is mounted at the end of a shaft. REMARK SN series are for 2 bolt mounting only *SN200 & SN300 are designed for stepped cyclindrical shafts.

SSN SERIES SERIES SSN 500 SSN 600 SSN 200 SSN 300 SSN 3000 SSN 3100 HOUSING RANGE 509-532 607-632 209-232 311-332 3024-3038 3122-3132 SHAFT DIA 40 ~ 140mm 30 ~ 140mm 45 ~ 160mm 55 ~ 160mm 110 ~ 170mm 100 ~ 140mm APPLICATION Design with solid base to handle heavier loads and speeds than SN. LUBRICATION grease or oil SEAL SELECTIONS Felt, ZF, Labryinth (TS), Taconite seal (TAC) or end covers (TSA or NA) if bearing is mounted at the end of a shaft. REMARK *SSN200 & SSN300 are designed for stepped cyclindrical shafts.