|
|
|
|
SEALING ARRANGEMENT |
TSNG SEAL
FOR SNU, SNG TYPE |
Double-Lip( TSNG ) seal : suitable for SNU, SNG, SNH, SNL series.
TSNG is another new product GLH has developed last year along with our SNG plummer blocks. It is a split design seal made of polyurethane( TPU
),which has excellent resilience. With its split design, this type of
seal makes mounting very simple, and offers the advantage of easy
maintenance and allows to work under dusty operating condition. |
|
|
FELT SEAL
FOR SN, SSN TYPE |
Felt seal: suitable for SN, SSN series.
Felt seal is a simple and economical seal that does provide adequate sealing actions |
V-RING ( TA ) seal : suitable for SUN, SNG series
V-Ring is made of synthetic rubber that can be effective under most
operating conditions. It offers the advantage of low friction and
sealing against dust and liquids. |
V-RING SEAL-TA
FOR SNU, SNG TYPE |
LABYRINTH SEAL-TS
FOR SN, SSN, SD TYPE |
LABYRINTH SEAL-TSU
FOR SNU, SNG TYPE |
Labyrinth seal :
TS : suitable for SN, SSN, SD series
TSU : suitable for SNU, SNG series.
- This type of seal is suitable for severe operating conditions.
It can tolerate to work under high temperature and high speed
environment. A synthetic rubber O-ring is provided in order to prevent
rotation of the seal on the shaft.
|
ZF seal : suitable for SN, SSN series.
- This type of seal is made of synthetic rubber ( NBR ).
It is suitable for application where low friction is required. |
ZF SEAL
FOR SN, SSN TYPE |
TACONITE COVER-TAC
FOR SSN, SD TYPE |
Taconite seals :
TSC : suitable for SSN, SD, SAF, SDAF series
TA : suitable for SNU, SNG series
- This type of seal incorporated an Oil Seal Metric, which can be
relubricated is recommended when operating conditions are severe, such
as in mining application. It offers the best sealing ability against
abrasive and contaminated environment |
LER seal : This type of seal is design primary for SAF and SDAF pillow blocks, which can handle high temperature and speeds. |
END COVER-A
FOR SN, SSN TYPE |
END COVER-TSA
FOR SN, SSN, SD TYPE |
END COVERS :
ASNA : suitable for SNG, SNU, SNH, SNL series.
NA : suitable for SN, SSN series
E.P : end cover for Taconite ( TAC ) seal, suitable for SSN, SD series.
EPR : suitable for SAF, SDAF series
TSA : suitable for SN, SSN, SD series
The housing must be blanked of with an end cover if the bearing is
mounted at the end of a shaft in order to seal out dust or abrasive
contaminants from penetrating into the housing and to retain lubricant. |
Locating ring |
Locating rings are available upon ordering. |
|
|
|
fdf |
Split Plummer block |
|
|
|
|
|
GLH Pillow Block stand unit
|
|
|
|
|
|
|
|
|
|
|
|
|
|